Redius Solutions

An ideal instrument for the measurement of COD of Effluents!

Offline COD Analyzer & Digestor is a micro-processor based instrument for the determination of COD in the Range of 50-2000 mg/Ltr in water sample.

The analysis involves the measurement of absorbance of the digested sample using the COD analyzer and relating it to the COD of the sample. The digestion of the sample water involves the water sample being treated with Mercuric Sulphate to remove the interference of Chloride ions subsequently mixing it with an appropriate amount of oxidizer mixture viz. Potassium Dichromate, Silver Sulphate catalyst & Sulphuric Acid and digesting the mixture in a closed vial at 150 degC for 2 hours.

Additional Information:

• Delivery Time: 4 weeks, ex-works

Accelerated Drying Process

Increased Halogen Radiators Power

Convenient Text Menu

Drying Graph Displaying

Storing 20 Drying Programs

Cooperation With Printer Or Computer

Additional Information:

• Delivery Time: 3 weeks

• Complies with USP, IP specifications
• Microprocessor based, easy to use
• 20 x 4 line alphanumeric LCD display with backlit
• 16 Soft touch membrane type keys
• Independent programmable setups for User & USP mode with storage
• Rs232 Printer attachment facility
• Automatically calculate result parameters like Tap Density, Inital Density, Hausner Ratio

• Automatically stores last Result
• Power Failure detection facility

Additional Information:

• Delivery Time: 2 weeks

• Set of weight from 1 mg to 200 gm.
• 1gm - 200 gm weights are made from Stainless steel material
• 1 mg - 500 mg weights are in the form of Fractional weights.
• Duly packed in velvet lined teak wood box
• Supplied complete with one Forceps and One rider.
• Total 23 pieces of weights will be supplied

Additional Information:

• Delivery Time: 4 weeks, ex-works

• Capacity: 120/220/320 gm
• Readability - 0.1 mg
• Internal Auto Calibration 
• Large LCD Backlight Display
• High grade chemicals resistance metallic body 
• RS232 Interface

• Sterilization at standard 121 C and 134 C cycles
• Visual Display of HMI Screen for error messages
• PLC based automation with user defined cycle
• Robust S.S 316 / 304 construction for door, chamber, jacket and steam generator

An Electromagnetic Sieve Shaker is a laboratory device used to separate and analyze granular materials based on their particle size. It operates using electromagnetic vibrations to create a rapid and consistent shaking motion, ensuring effective sieving of materials through a set of stacked sieves with varying mesh sizes. The shaker’s electromagnetic mechanism allows precise and controlled shaking, leading to uniform and efficient separation.

Typically used in industries like pharmaceuticals, food processing, chemicals, and materials science, this device helps determine particle size distribution for quality control, research, and development purposes. The shaker’s features often include adjustable vibration frequencies, easy operation, and a digital timer for accurate test durations. It can handle both dry and wet sieving processes, making it versatile for a wide range of applications. The result is a faster, more reproducible sieving process compared to manual shaking methods, improving productivity and accuracy in material analysis.

PRECISION ELECTRONIC WEIGHING BALANCE

WEIGHING CAPACITY: 120/220/320 GM

WEIGHING SENSITIVITY: 0.0001 GM (0.1 MG)

WEIGHING CALIBRATION: INTERNAL/EXTERNAL CALIBRATION

• Inner Seal (Chamber) : SS-304
• Material of Construction  : SS 304 / MS Powder Coated
• Sterilization Cycle  : Warm & Cold cycles are possible
• Aeration : In built Aeration facility provided
• Cartridge size : As per machine size
• Operating Pressure  : Negative pressure cycle
• Testing pressure  : 1.5 Kg/cm2
• Single Door / Double Door
• Gasket  : Silicon Gasket (10/12 mm solid section)
• Heating : Heaters on all sides of Chamber for uniform heat distribution.
• Temperature Sensor : PT???100 sensor
• Operating Temperature : 65°C (chamber)
• RH Sensor : For measuring and controlling the humidity of the chamber
• Humidification : Special Humidifier for the humidification of load and heating of gas
• Pressure Transmitter : Pressure ??? Vacuum measurement during charge & discharge of load
• Pressure trans range : 1???3 Bar
• Vacuum : Special Noise???less Vacuum venture for vacuum and aeration of the load.
• All Valves for Automation : Teflon construction Pneumatic valves, Solenoid valves.
• Automation Hardware : PLC & HMI Make: Schneider
• Process Reports : Generated by software for each & every cycle 
• Operation modes : Auto & Manual Mode
• Stabilization Time : 1- 99 min
• Pre???Vacuum : 1 ~ 0 Bar
• Pre???Vacuum Hold time : 1???99 min
• Vacuum tolerance : 1 ~ 0 Bar
• Conditioning Load : RH injection (0~99 RH)
• Load Conditioning (RH dwell time) : 1-99 min
• ETO Gas Pressure : 1~3 Bar
• Gas pressure drop tolerance : 1~3 Bar
• Exposure Time :  1-9999 min
• Post Vacuum (Gas dilution) : 1 ~ 0 Bar
• No of Pulse of Post Vacuum : 1-9
• Print Interval Time set : 1-99 min

Additional Information:

• Production Capacity: 10 / month
• Delivery Time: 4 weeks

Additional Information:

• Production Capacity: 100 / month
• Delivery Time: 3-4 weeks
• Packaging Details: Box Packing

The instrument is based on Spectrometric Principle measures the Chlorine Demand in water. It also can measure the Residual Chlorine present in Chlorinated Water both as free chlorine and combined chlorine.

Measuring Range: 0 - 10 PPM

Further range possible with dilution.

Additional Information:

• Delivery Time: 4 weeks, ex-works

• Titrator designed for accurate estimation of moisture contents in various samples.
• The instrument is having a Magnetic Stirrer and Motorized Dispenser for addition of Karl Fischer Reagent.
• A backlit LCD Display and Keyboard on front panel make the instrument user.
• The volume of the K. F. Reagent added, is displayed on the LCD Display.
• The end point of the titration is indicated by an audio signal.
• The factor of the Karl Fischer Reagent and the Percent and PPM of the sample under test should be calculated manually using simple formula.
• The instrument is having built-in Validation and Calibration facility for dispensed volume.

• Friendly and easy to operate
• Digital Automatic Titrator suitable for accurate estimation of moisture
• Easy to operate advanced Volumetric Titrator
• Incorporated with peristaltic pump
• Valve-less Dispenser eliminates the need of cumbersome piston burette
• Audio Signal to indicate the end point of the titration
• Warning messages to avoid wastage of chemicals
• Status of titration displayed on screen
• Manual calculations of factor and results
• Equipped with inbuilt volume validation facility

Additional Information:

• Item Code: MATIC-MD

• 7” Touch Screen Display
• Wide Speed Range up to 250 rpm
• Rotating Spring Less Technology
• Robust Ball Bearing Suspension
• SS316 Spindles
• Direct Measure with Time to Stop
• Built-in USER Mode & Lock Mode
• Built-in USB Port for Data Transfer
• Displays Viscosity, Speed, Torque, Shear Stress, Time, Temperature
• Units: cP (Centipoise), mPa.s/Pa.s
• Auto Range Min. & Max. Viscosity 
• Multi Viscometer Range (RV, HA-5HB, KU ) in 1 Viscometer

Additional Information:

• Delivery Time: Within 2 Weeks

A Bulk Density Meter is an instrument used to measure the bulk density of granular materials, powders, or aggregates. Bulk density refers to the mass of a material per unit volume, including both the particles and the spaces between them. This measurement is crucial in industries such as pharmaceuticals, food processing, construction, and chemicals, where the material's packing density affects processing, storage, and transportation.

The meter works by filling a calibrated container with the sample material, then measuring its weight and volume to calculate the bulk density. Some models are automated, providing precise, quick results with minimal operator intervention.

Bulk density meters are commonly used for quality control, material characterization, and research purposes, as the bulk density can influence material handling, flowability, compaction, and stability. These meters are reliable, easy to use, and help ensure consistency and efficiency in material processing and formulation.

Additional Information:

• Production Capacity: 100 / month